Search found 313 matches
- Tue Sep 12, 2017 6:25 pm
- Forum: Hardware
- Topic: IKEA Trådfri groups
- Replies: 4
- Views: 15610
Re: IKEA Trådfri groups
Ok, I see. Yes, you will probably see that they are not turned on simultaneously. You do however have some control over the color temperature. In the preset dimLevel positions for the lamps you can specify both brightness and color temperature. The two values are separated by a colon. You can access...
- Tue Sep 12, 2017 5:08 pm
- Forum: Hardware
- Topic: Ikea Trådfri - some problems
- Replies: 6
- Views: 17979
Re: Ikea Trådfri - some problems
Hmmm, if the status in ONH is updated than it is even more strange, because that is the only case when you can get the 4,04 errors. The fact that it works with the remote does not say anything since then the remote communicates directly with the lamp without using the gateway. ONH and the app goes v...
- Mon Sep 11, 2017 8:54 pm
- Forum: Hardware
- Topic: IKEA Trådfri groups
- Replies: 4
- Views: 15610
Re: IKEA Trådfri groups
Hi!
I am sure it is doable. I down prioritized it, since the same concept already exists in OpenNetHome (LampGroup-Item). Do you think this could meet the requirements you have?
I am sure it is doable. I down prioritized it, since the same concept already exists in OpenNetHome (LampGroup-Item). Do you think this could meet the requirements you have?
- Mon Sep 11, 2017 8:47 pm
- Forum: Software
- Topic: Can you please add support for Z-Wave locks?
- Replies: 10
- Views: 15144
Re: Can you please add support for Z-Wave locks?
Actually a bit of both. It seems lock commands require some extra security/authentication and it became a bit complex. Also I have not been working with the Z-Wave stuff for a while and it takes quite a while to pick up all the threads to start on it again. I have a bit limited time to work on the p...
- Mon Sep 11, 2017 8:42 pm
- Forum: Hardware
- Topic: Ikea Trådfri - some problems
- Replies: 6
- Views: 17979
Re: Ikea Trådfri - some problems
Well, the issue in "Support for IKEA Trådfri" proved to be insufficient power supply for the gateway (or a bad gateway), so that was a bit special. When it stops working, can you still control it via the app?
- Mon Sep 11, 2017 8:39 pm
- Forum: Software
- Topic: Controlling brightness only if the lamp already is on
- Replies: 4
- Views: 8818
Re: Controlling brightness only if the lamp already is on
You can create a SunTimer where the action sets the OnBrightness attribute to a lower value at night and back to a higher value in the morning. If the lamp is off, it will not be turned on by this and if the lamp is on, the brightness will be changed immediately.
- Mon Sep 11, 2017 8:36 pm
- Forum: Software
- Topic: "Event queue full" Error after 10 minutes of usage
- Replies: 6
- Views: 11951
Re: "Event queue full" Error after 10 minutes of usage
Hmmm, this looks a bit bad. It might be because creation messages get repeated. I added filtering for the MQTT-Message attribute now , so that won't happen. The change is in the nightly build, so you can try it out. If that does not help, please send me the logfile, so I can get more detailed inform...
- Sun Sep 10, 2017 1:30 pm
- Forum: Hardware
- Topic: Ikea Trådfri - some problems
- Replies: 6
- Views: 17979
Re: Ikea Trådfri - some problems
Hmm, the 404 (4.04) indicates that the Gateway cannot find a lamp that Nethome is trying to get information from. Could it be so that you have created a HomeItem for a lamp, that later has been removed from the Gateway or that you have reset the Gateway? It looks like Nethome has a lamp Item which h...
- Tue Aug 29, 2017 7:06 pm
- Forum: Hardware
- Topic: NexaRemapButton House code other than A-H
- Replies: 3
- Views: 13544
Re: NexaRemapButton House code other than A-H
Yes, of course!
It is fixed now in the nightly build. Just do "sudo nethome upgrade-nightly" if you are running on Raspberry.
It is fixed now in the nightly build. Just do "sudo nethome upgrade-nightly" if you are running on Raspberry.
- Sun Aug 27, 2017 12:11 pm
- Forum: Software
- Topic: Feature request: Support for Apple HomeKit
- Replies: 1
- Views: 5450
Re: Feature request: Support for Apple HomeKit
I totally agree - the only thing stopping me is - time... I have not had time to look into it yet.