Re: VCP option not vissible
Posted: Thu Jan 08, 2015 6:30 pm
You are not giving very much information to go on, but I am guessing that you are running Windows (7?) and that you have downloaded the drivers from http://opennethome.org/hardware/install-tellstick/.
The most likely cause is that you still have some drivers from Telldus center somewhere in there. Unfortunately they don't play nice with standard VCP-drivers. My suggestion would be to uninstall the Telldus SW (if you have any) and unistall the driver you see (by right-clicking in the device manager) and reboot the computer. Then try to install the drivers from OpenNethome again.
Hope this helps!
The most likely cause is that you still have some drivers from Telldus center somewhere in there. Unfortunately they don't play nice with standard VCP-drivers. My suggestion would be to uninstall the Telldus SW (if you have any) and unistall the driver you see (by right-clicking in the device manager) and reboot the computer. Then try to install the drivers from OpenNethome again.
Hope this helps!